EASEBASE TPO-Coated Metal offers an efficient roofing solution, as it allows for direct welding of the membrane to the metal, which eliminates the need for adhesive stripping. EASEBASE TPO-Coated Metal is available in multiple colors, providing both a functional and aesthetic appeal.
The EASEBASE TPO membrane may also be directly heat welded to the TPO Coated Metal, resulting in significant savings for contractors as there is no need to strip in edging with TPO Cover Strip or other flashing materials. This allows for easy installation and time efficiency, ultimately reducing costs. Easy to cut and form for creating a variety of edge sizes and profiles, EASEBASE eliminates the need for additional TPO Pressure-Sensitive Coverstrip, ensuring a seamless and professional finish across any commercial roof. Providing a monolithic, watertight protection for TPO roofing systems.
TPO coated metal is used on single ply roofing systems as perimeter edge metal, cap metal, and for other prefabricated accessories compatible with TPO roofing systems.
Install our TPO Coated Metal with a minimum 1/8-inch (3.1 mm) and maximum 1/4-inch (6.3 mm) between adjoining sections.
Do not install in direct contact with asphalt or asphaltic membranes. If exposed to weather prior to installation, clean the membrane side of the TPO Coated Metal with an appropriate cleaner and dry thoroughly before attempting to heat weld.
1. Install 2-inch (50.8 mm) wide heat resistant tape over joints in TPO Coated Metal.
2. Heat weld a 6-inch (152.4 mm) wide piece of TPO Unsupported Flashing over the joint.
3. Machine welds to TPO Coated Metal must be at least 1 1/2-inch (38.1 mm) wide. Hand welds must be at least 2-inch (50.8 mm) wide.
1.Store coated metal in a cool, shaded area and cover with light-colored, breathable, waterproof tarpaulins. TPO Coated Metal that has been exposed to the weather must be prepared with Weathered Membrane Cleaner prior to hot-air welding.
2.Wear proper personal protective equipment, such as gloves and eye protection.
Details
Sheet Size | 4' (1.21 m) x 10' (3.05 m) |
---|---|
Steel Thickness | 0.024" (0.6 mm) nominal (24 gauge) |
Membrane thickness | 0.015''~0.035" (0.38~0.89 mm) or customized |
Membrane Reinforced | as your requirements |
Steel Type | Hot Dipped Galvanized Steel (G90) |
Packaging | 5 or 30 sheets per pallet |
Weight | 0.937~1.1 lb/ft2(4.6~5.4 kg/m2) |
Color | Gray, White, Tan, Patina Green, Rock Brown, Terra Cotta,.etc |